Welcome to Shandong EAAK Machinery Co., Ltd

+86-531-82020399 sales@sinowaterjet.com
EAAK Water Jet Cutting Machine > News > Industry Dynamics >

The difference between supercharged oil pump and direct drive pump

Post time:2019-05-08    By:EAAK    Clicks:
The direct drive pump, also known as the three-cylinder pump, as the name implies, directly drives the crankshaft with three pistons to rotate, resulting in super high water pressure. The design of the direct drive pump originated in the United States, gradually matured and occupied a significant weight in the water cutting industry. More than 20% of the waterjets in the market use direct drive.
 
The supercharged oil pump is driven by oil pressure to form a larger pressure. The oil pump is formed by ultra-high pressure. Therefore, the fittings are generally made of hard metal, and the failure rate is relatively low in use. The waterjet of the supercharged oil pump is the most widely used waterjet booster type.
 
In terms of pressure, the pressure of the booster pump is generally higher than that of the direct drive pump, so it can cut a thicker metal material and use a wider surface. Although the water jet of the direct drive pump cannot form such a high pressure, but in the tile More cost-saving in cutting, food, and cleaning operations.

Recommended Reading

What are the factors that affect the life of gem nozzles?

As a very important cutting tool for metal or stone processing, the waterjet cutting machine, we must pay attention not o...

Waterjet cutting machine advantage in the glass cutting industry

Waterjet cutting machine advantage in the glass cutting industry Waterjet machine has been applied in many fields, then w...

The advantage of water jet cutting compare with laser cutting

Water jet cut with advantage than aser cutting 1, there is no limit to the cutting thickness; 2, Reflective material such...