Big difference between sand cutting and pure water cutting.Pure water cutting is widely used for cutting corrugated cardboard,sand cutting suit for cutting stone,metal and glass....
Clicks: 丨 2023-02-03
The water jet cutting on less than 1 square millimeter of square meters,and its cutting accuracy can reach 0.1mm....
Clicks: 丨 2023-02-03
Causes and treatment methods of oil temperature rise in waterjet cnc cutting machine supercharger system.We need to maintans the supercharger system of waterjet cutter when using everyday....
Clicks: 丨 2023-02-03
water jet cutting widely used in field of composite materials...
Clicks: 丨 2023-02-03
The water jet cutting machine uses ultra-high pressure technology to pressurize ordinary water to a pressure of 250-400 MPawe need to set the cutting speed and accuracy according to actual needs....
Clicks: 丨 2023-02-03
I need a water cutting machine to cut stone,glass and metal materials,shall I buy from China or buy from local?I need a suggestion. Ok,it is a good question and easy to have answer--certainly buy from China is a better choice.Nowadays the chinese wat...
Clicks: 丨 2023-02-03
When we use waterjet machine to cut hard and thick materials such as stainless steel,marble,granite and so on,the cutting edge with obvious slope,it is difficult to polish for stone mosaic,especially for complex grabite mosaic,it is easy to be broken....
Clicks: 丨 2023-02-03
When we need a water jet cutting machine to cut metal,stone,glass,foam and other materials,there is a question that how to choose a suitable waterjet cutter？...
Clicks: 丨 2023-02-03
Waterjet application - rubber cutting Waterjet machining has many advantages over the same functions of the sawing, arc cutting and laser cutting in the cutting process of the blanking. It is dust-free, smoke-free, and has no flare. ...
Clicks: 丨 2023-02-03
It is very different from the water cutting machine.During the processing of the electric spark, under the instantaneous high temperature of the spark discharge and the rapid cooling of the working fluid, the chemical composition and microstructure of...
Clicks: 丨 2023-02-03
In the actual operation process, the conditions are different, that is to say, due to different working conditions, the corresponding parameters required for the corresponding water cutting are also different. This also makes it difficult to assemble ...
Clicks: 丨 2023-02-03
How to replace and install the water cutting machine sand pipe....
Clicks: 丨 2023-02-05